Payment & Shipping Terms:
|Raw Material:||Expandable Polystyrene||Application:||Foam Cup|
|Type:||EPS Foam Cup Making Machine||Production Cycle:||6~16 Seconds/cycle|
|Stroke Height:||3~180 Mm||Dimension(L*W):||1400mm*800mm*2500mm|
|Cup Size:||6~16 Oz||Power:||13.5kw|
Plastic EPS drinking cup thermoforming machine EPS instant noodle cup making machine
Features of eps cup machine
1. EPS Foaming-Cup Production Line is widely applied in producing large amount of hot coffee cup, hot tea cup, hot soup blow, noodle tub and other food and beverage packing .
2. Light weight, good rigidity and well heat isolation.
3. The machine holds many merits such as high foaming times, high producing efficiency, low steam consumption, low cost and different model products are made at same time.
4. Pipes and tubes of the transferring system are all made from stainless material so that they resist eroding and easy to be cleaned.
5. Pre-expand and forming procedures are all operated by automatic controller, the mechanical and electrical device or apparatuses are all from international famous brand
Primary Configuration and Main Parameters of the Production Line
1. This EPS foam cup making machine is using Expendable Polystyrene as raw material.
2. Finished products: foam cups and bowls.
3. Main machines: boiler, mixer, pre-foaming machine, drying machine, shake boult, center filling device, forming machine
4. PLC control
|Cup Size||6~16 Oz|
|Cavity No.||6~8 Pcs|
|Production Cycle||6~16 seconds/cycle|
|Power Consumption||300 W (Forming Machine)|
|1. Raw Material Mixer and Feeding Device||Voltage||380V(220V), 50Hz|
|2. Pre-Foaming Machine||Steam press||0.7-0.8MPa|
|Machine size (L*W*H)||1400*800*2500mm|
|3. Drying Machine||Output||150-200Kg/h|
|Machine size (L*W*H)||2800*600*1100mm|
|4. Vibration Machine||Output||50-200Kg/h|
|Machine size (L*W*H)||1100*1000*1000mm|
|5. Centre filling device||Motor||2.2Kw, 3 sets|
|Big hopper||1500*1500*450mm, 3 sets|
|Small hopper||1200*1000*1000mm,1 set|
|Material stock bag||1000*1000*1200mm|
|6. Forming Machine||Stroke height||3-180mm|
|Cooling water press||0.4-0.5MPa|
|Working area (L*W)||1200*280mm|